New Diesel Truck and Bus Emissions Cleaner Than Expected
According to the results of a new study, emissions from new diesel truck and bus engines is substantially lower than expected.
In releasing the findings, the Diesel Technology Forum study found a more than 60 percent reduction in emissions of nitrogen dioxide as compared to previous 2007 models, and 99 percent reduction compared to 2004 models. The study noted that the reductions “exceeded substantially even those levels required by law.”
“These findings underscore just how clean this new generation of fuels, engines and emissions control technology really is, coming in substantially cleaner than required under the EPA and California Air Resources Board (CARB) standards” said Allen Schaeffer, Executive Director of the Diesel Technology Forum, a Frederick, MD-based organization representing the diesel industry.
“Not only are the 2010 and later model year technology near zero emissions for fine particles, this study confirms that they are also substantially below the EPA/CARB standard for one of the key precursors to ozone formation (nitrogen dioxide),” said Schaeffer.
“These findings ultimately translate into clean diesel technology delivering significant clean air benefits for local communities. There is also great confidence in this new generation of clean diesel technology from those that use it every day. According to our research, today more than 11 percent of the commercial trucks and buses on the road are using the 2010 or newer generation of clean diesel technology; and more than one-third are using 2007 and newer technology[3]. Not only are these heavy-duty trucks and buses lower in emissions for particulates and smog forming compounds like nitrogen dioxide as reported today, but they must continue to meet these near-zero clean air performance standards for 435,000 miles; almost four times longer than required for passenger cars,” noted Schaeffer.
“Getting to these near-zero levels of emissions is a result of the highly integrated clean diesel system; cleaner ultra low sulfur diesel fuel, advanced engine technologies and emissions control systems,” explained Schaeffer. “Meeting the 2010 standards for highway vehicles was a major milestone, but we’re not done yet. Starting January 1, 2014, heavy-duty engine and truck makers will offer new models that comply with the additional new standards for lower emissions of carbon dioxide (CO2) and minimum fuel economy levels, as required by EPA and the National Highway Traffic Safety Administration (NHTSA).
“This clean diesel, clean air success story is due to the billions of dollars in investments made by engine manufacturers, fuel suppliers and emissions control technology companies. While this study is limited to highway diesel engines used in commercial trucks and buses, over the last five years virtually the same requirements (cleaner diesel fuel and progressively lower emissions standards) have been phased in for a large portion of new non-road engines. This coming year – 2014 – marks one of the key emissions milestones from some of the larger diesel engines used in off-road machines and equipment and marine vessels and locomotives,” noted Schaeffer.
The study can be found at www.dieselforum.org.
Category: Engines & Drivetrains, General Update, Green
Subscribe
If you enjoyed this article, subscribe to receive more just like it.
